Rosslare SA-14G
Wireless Smoke and Heat Safety Detector Series
Advanced Optical Particle Detection using IR Technology. (Not Radioactive). Both the RF Base and the Sensor use 9 Volt Batteries. Base is supervised with Low Battery sensing, TEST Button, LED indicators for Detector and Base. Local PIEZO sounder. Meets: ETSI, CE
> Fully Supervised: RF "Keep Alive" supervision signal (sent to control unit every 20 minutes).
> Detector Low Battery sensing and reporting: Sends signals to control unit by RF, in the event that the Detector has a low battery.
> Detector Removal Tamper sensing and reporting: Detects the removal of the sensor from the base as a sensor Tamper and transmits the signals to the control unit.
> Ultra-Low Battery Consumption: 16 uA Standby,10mA Transmit current
> Local Piezoelectric Siren and Beeper: Provides audio alert with a high level signal locally at the point of the alarm. Beeper for the Low Batt indication in the Head unit.
> RF Base Low Battery sensing and reporting: Sends signals to control unit by RF, in the event that the Detector has a low battery.
> LED visual Indication: Base LED will flash during the Transmission to show visual indication that the base unit RF function is OK.
> Multi Application Base Unit: One base unit can support any one of the SA-14,15,16,17 models with the correct adapter.
> Long Range Small Size: For such a small unit, the RF range and antenna design becomes a major problem SA-14,15,16,17 has special antenna construction to get 200 to 250 meters open space range with selected panels.
> Easy Installation: The RF base unit mounts to the wall first,without opening the insodes of the unit. The detector head simply twists on
> Adjustable RF Power and Frequency: this allows us to produce units to meet the requirements of almost any country.
|
|
