Toshiba IK-52V
1/2" Progressive Scan monochrome "Icecube" camera
Progressive Scan
VGA output to frame grabber or direct to a VGA Monitor
60 Frames/Sec. Full Screen and 180 Frames/Sec. Partial Scan (1/60 sec. Non Interlaced)
Measures only 29mm square
Weighs 46g (1.59 oz.)
1/2-inch CCD formats
C-Mount Lens Mount
659(H) x 494(V) resolution
1 lux@F1.4 sensitivity
60 dB S/N Ratio
Power Supply 12 VDC (+10.5VDC - +15VDC)
Power Consumption 120mA (DC + 12V)
Image Sensor Progressive Scan 1/2 inch CCD
Effective Pixels 659 (H) x 494 (V)
Horizontal Resolution 500 TV Lines
Pixel Size 9.9 µm (H) x 9.9 µm (V)
Scan Frequency Horizontal: 31.469 kHz, Vertical: 59.94 Hz
Synchronizing System Internal/External (HD/VD) (HD/VD inut/output area selected by rear panel switch
Sync Modes
All pixels scanning, Partial scanning,
1-pulse trigger sync-reset, Pulse width trigger sync-reset,
1-pulse trigger sync-nonreset,
Pulse width trigger sync-nonreset, Reset restart
Standard Subject Illumination 400 lux F5.6 (Gain off)
Minimum Subject Illumination 1 lux, F1.4, manual gain set to maximum
S/N Ratio 60dB
Video Output 1.0V (p.p)
Output Impedance 75 Ohm, unbalanced
IR Filter None
Lens Mount C-Mount
Gain Switch Off (0dB) / On (0 to 18dB)
Electronic Shutter Settings Off (1/60),1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000, 1/100000
Rear Panel Settings Mode/Sensitivity/Sync in-out
Weight 45g (1.59 oz.)
Dimensions 29mm (W) x 29mm (H) x 29mm (D)
Connector Hirose Part Number: HR10A-10R-12PB
|
|
