Toshiba IK-UM44H
1/3'' single CCD color lipstick remote micro video cameras heads - NTSC format
1/3-inch, 410,00-pixel CCD with micro lens technology
Minimum illumination of 10 lux at F1.6, and standard illumination of 200 lux at F1.6
Easy to use, on screen menu control
Electronic shutter with nine selectable speeds
Auto-shutter mode
Automatic tracking white balance
S-video and composite output
Automatic Selection circuit for internal and external synchronization
Simple adjustment of sub-carrier and horizontal phase
Screw-lock connector
Extension cables up to 30m (optional)
Wide choice of lenses (optional)
Imaging element 1/3", 410,000 pixel CCD image area sensor with microlens
Effective pixels 768 (H) x 494 (V)
Resolution 470 x 350 lines (H x V)
S/N ratio 46dB
Standard subject illumination 200 Lux (F1.6 3000° K)
Minimum subject illumination 10 Lux (F1.6 3000° K)
Imaging area 4.88mm x 3.66mm (H x V)
Scan frequency 15.734kHz horizontal, 59.94Hz vertical
Scan type 2:1 interlaced
Video outputs VBS 1 Vp-p (BNC) x 1 S (Y/C separated) x 1
Output impedance 75 ohms, unbalanced
Synchronization method Internal or external (automatic switching)
External synchronization Input: VBS 1 Vp-p (BNC), 75 ohms unbalanced
Sync. frequency: ± 50ppm of NTSC standard
SC (Fine) phase: rear adjustment
White balance Auto-tracking/manual/push to set
Electronic shutter settings 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000, second, Auto mode to 1/50,000 second
Sensitivity/AGC switching Sensitivity boost (+6dB)/AGC on-off
Accessories supplied Instruction manual, camera holder
Operating accessories Lenses: 3, 5.5, 11, 18mm, AC adaptor, camera cables
Dimensions 12mm x 36mm (15/32" x 1 15/32") (diam. x length) (excl. lens and connector)
Weight 9g (1/3 ounce) (excl. lens)
Power source DC 12V (mating connector: HIROSE HR10A-7P-4S)
|
|
